APC Easy UPS On-Line 2kVA (1600W) Tower

Manufacturer: APC

APC Easy UPS On-Line 2kVA (1600W) Tower. 230V Input/Output. 4x IEC C13 Outlets. With Battery Backup. Smart Slot, LCD Graphics Display.

Manufacturer part number: SRV2KI

Availability: Out of stock - on backorder and will be dispatched once in stock (Please Contact for Availability).

Estimated Time To Deliver: 3-5 Business days

High quality, Double-conversion online UPS designed for essential power protection needs even in the most unstable power conditions.

Features:

Pure static bypass switch without bridging contactor securing a fast and reliable transfer to and from bypass, rated for 125% nominal load.
Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.
The operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection
This product has a power factor corrected input side ensuring that the input power factor is always 1 regardless of load and mains voltage. A power factor of 1 minimizes installation costs by allowing the use of smaller cables and smaller fuses.
Intelligent battery management
The mini slot supports various optional management cards which provide basic or essential monitoring, management and control features for the UPS.
LCD graphics display
Serial connectivity
USB connectivity
Provides remote power management of the UPS over the network
Customize UPS capabilities with management cards
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Pure sine wave output on battery
Generator compatible
Ensures clean, uninterrupted power to protected equipment when generator power is used.
High-efficiency rates that remain stable even at lower operating power levels
Input Power Factor Correction
Double conversion online topology
Guarantees a consistently high level of power quality. Any disturbances on the distribution waveform are regenerated via the zero transfer time AC to DC then DC to AC conversion process.
The battery is only used as a backup source.
The operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection

Output:
Max Configurable Power (Watts)	1.6kWatts / 2.0kVA
Output Voltage Note	Configurable for 220: 230 or 240 nominal output voltage
Efficiency at Full Load	88.0%
Output Frequency (sync to mains)	50/60Hz +/- 3Hz Sync to mains
Other Output Voltages	220, 240
Load Crest Factor	3:1
Topology	Double conversion online
Waveform type	Sine wave
Bypass	Internal bypass (automatic and manual)
Input:
Input frequency	40~70Hz
Input voltage range for main operations	160V~280V
Number of Power Cords	1
Efficiency at Full Load	88.0%
Other Input Voltages	220, 240
Batteries & Runtime:
Battery type	Lead-acid battery
Typical recharge time	4 hour(s)
Battery Charge Power (Watts)	76W
Battery Volt-Amp-Hour Capacity	-
Communications & Management:
Interface Port(s)	DB-9 RS-232, USB
Control panel	Multifunction LCD status and control console
Audible Alarm	Alarm when on battery: distinctive low battery alarm: overload continuous tone alarm
Available SmartSlot™ Interface Quantity	-
Surge Protection And Filtering:
Surge energy rating	600Joules
Physical:
Maximum Height	238MM, 23.8CM
Maximum Width	145MM, 14.5CM
Maximum Depth	400MM, 40.0CM
Net Weight	16.8KG
Shipping weight	18.1KG
Shipping Height	355MM, 35.5CM
Shipping Width	235MM, 23.5CM
Shipping Depth	525MM, 52.5CM
Colour	Black
Environmental:
Operating Temperature	0°C~40°C
Operating Relative Humidity	0%~95% (Non-condensing)
Operating Elevation	0~3048m
Storage Temperature	-20°C~50°C
Storage Elevation	0~15240m
Audible noise at 1 meter from surface of the unit	50.0dBA
Protection Class	IP20
Conformance:
Approvals	CE, IEC 62040-1-1, IEC 62040-1-2
Standard warranty	2 years repair or replace