The ProCast’s included anti-vibration shock mount and snap on HyperX Shield pop filter work together to help reduce unwanted rumbles and pops in your recordings. It also features a switchable 80Hz high-pass filter and -10dB PAD, further ensuring that you’re only recording exactly what you want in a variety of scenarios. With support for 3/8” and 5/8” threads, the stylish ProCast is compatible with most arms and stands, making it an easy way to take your streaming or recording setup to the next level.
ProCast’s design enables better high-frequency details compared to electret and dynamic mics and improved low-frequency performance over smaller diaphragm condensers.
The cardioid polar pattern emphasizes sounds in front of the mic, making it perfect for voiceovers, streaming, vocals, podcasts, or other single-source audio recording.
The ProCast requires 48V of phantom power, so connect it via XLR cable to professional interfaces or preamps to start your recording. [2]
Simply snap the HyperX Shield to the ProCast’s included anti-shock mount to filter out those plosive puffs of air that result from p sounds.
Isolate the mic and suppress the sound of unintentional rumbles and bumps with the elastic rope suspension.
ProCast’s switchable 80Hz filter helps reduce unwanted low-end frequencies like rumbles and vibrations. The passive attenuation allows the mic to handle high sound pressure level sources of audio.
The versatile mic and adapter fit 3/8-inch and 5/8-inch threaded setups, so it’s compatible with most mic stands or boom arms.
The sleek, unique HyperX design blends form and function, making the ProCast as elegant as it is practical.
Microphone Specifications
Element
Gold-sputtered externally-polarized condenser
Diameter of diaphragm
1???
Polar pattern(s)
Cardioid
Frequency response
20Hz~20kHz
Sensitivity
-38?? 3dBV (1V/Pa at1kHz)
Maximum input sound level
140dBSPL (THD 1%@1kHz)
Noise (RMS)
-118dBV (A-weighting)
Dynamic range
123dB
Signal-to-noise ratio
75dB
Output Impedance
16 ???
Phantom power requirements
48V DC, 3mA typical
Connections and Features
Shock mount
Built-in
Pop Filter
Metal, snap-on
Connection type
Balanced 3-pin XLR male
Controls
Passive attenuation device (PAD)
-10dB
High-pass filter
-3dB@80Hz, -12dB/Octave
Physical Specifications
Weight (Microphone)
376g
Weight (Shock mount and pop filter)
127g
Total Weight
503g
Dimensions
134L*102W*209H (mm)
.png)